Metal working Fluid

I. Product Introduction This product is composed of special base oil, anti-wear and anti-friction agent, anti-rust agent, aluminum corrosion inhibitor and other additives. Is a semi-synthetic microemulsion cutting fluid which is efficient, safe, economical, non-toxic and recyclable. Mainly used in metal processing, suitable for alloy steel, carbon steel, aluminum alloy, die steel and other materials. 2. It is recommended to use water with a concentration of 1: (15-20) (purified water is recommended). When the concentration is too low, the function will be scratched; when the concentration is too high, the normal function will be affected and the phenomenon of sticking knife will occur. III. Daily management 1. Appearance: daily inspection, color change, miscellaneous oil pollution, foam, foreign body intrusion and other conditions. 2. Odor: daily detection, aerobic chiseling, no oil pollution, foam, foreign body and egg smell; Fungi: Gassy or gassy. 3. Concentration: test every day and control at + 1-1%. 4. PH value: test every day and control the PH value at 8.0-9.5.

一、产品介绍

本品由特种基础油、抗磨减摩剂、防锈剂、铝缓蚀剂等多种添加剂复配而成。是一种高效、不保、经济、无毒害、可以循环使用的半合成型微乳切削液。主要用于金属加工中，适用于合金钢、碳钢、铝合金、模具钢等材质。

二、使用方法建议一般使用浓度为1:(15-20)的比例兑水使用(推荐使用纯净水)。浓度过低时,会划功能;浓度过高时，也会影响功能的正常发挥并且出现粘刀现象。

三、日常管理

1、外观:每天检测，颜色变化、杂油污染、泡沫、异物侵入等状况。

2、气味:每天检测、有氧凿，无张油污染·泡沫、异物复心蛋味;真菌:发而气体或。

3、浓度:每天检测，控制在+1-1%。

4、PH值:每天检测，PH控制在8.0-9.5。