New Energy Vehicle Tire Purchase Guide

New energy vehicles rely on electric motors to obtain power from batteries. Their unique power system often makes them heavier in design, and their powerful motors can instantly output greater torque than traditional fuel engines.

Although these characteristics give new energy vehicles excellent acceleration performance and driving experience, they also inevitably put additional pressure on the vehicle's tires, which in turn has a significant impact on tire wear, driving stability and traction. ​

Multiple factors that accelerate wear​

Compared with traditional internal combustion engine vehicles, the direct torque output common in new energy vehicles means that the tires will be subjected to greater instantaneous impact during starting and acceleration.

At the same time, the increased mass of the vehicle also makes the tires need to bear more pressure during driving. In addition, the driving behavior of new energy vehicle drivers may also change potentially, such as frequent sudden acceleration and sudden braking. 

These factors combined lead to a significantly faster wear rate of new energy vehicle tires. Figures commonly cited in the industry show that compared with equivalent internal combustion engine vehicles, the tire life of new energy vehicles is reduced by 20%. ​

Dual requirements for silence and low rolling resistance​

In addition to wear problems, new energy vehicle tires also face other special requirements. Since new energy vehicles do not have the cover of engine noise, tire noise will be more obviously transmitted to the car, which puts higher requirements on the quiet performance of tires.

In order to improve driving comfort, tire manufacturers need to adopt special designs and materials to reduce the noise generated by tires during driving. At the same time, the cruising range of new energy vehicles has always been the focus of consumers, and the rolling resistance of tires will directly affect the energy consumption of vehicles. 

The greater the rolling resistance, the more electricity the vehicle consumes during driving, and the shorter the cruising range. Therefore, new energy vehicles also attach great importance to the low rolling resistance performance of tires. Tire manufacturers optimize the structure and formula of tires to reduce the friction between tires and the ground, thereby reducing rolling resistance and improving the vehicle's endurance. ​

Three key points for judging new energy special tires

When judging whether it is a new energy special tire, consumers can start from multiple aspects. First, check the tire logo and product description. New energy special tires usually clearly mark that they are suitable for new energy vehicles on the tire sidewall or product packaging, and will explain in detail the special design and performance advantages of the tire for new energy vehicles, such as low rolling resistance, quietness and other characteristics.

Secondly, pay attention to the specifications and parameters of the tire. New energy vehicles may have higher requirements for tire load capacity and speed rating due to their heavier body and greater torque. New energy special tires are designed according to these requirements, and their load index and speed rating are usually different from those of ordinary tires.

In addition, the pattern design of the tire can also be observed. The pattern design of new energy special tires often focuses more on reducing noise and rolling resistance, which is different from the pattern of traditional tires.

​
Demand-based tire selection strategy ​

However, it should be clear that not only new energy special tires can be used for new energy vehicles. In fact, any tire that meets the vehicle's load requirements, pressure requirements and speed requirements can be used on new energy vehicles.

When choosing tires, consumers do not need to blindly pursue new energy special tires, but should choose according to their actual needs and priorities. If you pay more attention to driving comfort, you can choose tires with excellent quiet performance; if you often drive long distances and have high requirements for tire durability, then tires with good wear resistance will be a better choice; if you are very concerned about the vehicle's cruising range, then low rolling resistance tires are the best choice.​

Practical auxiliary suggestions for choosing tires​

When choosing tires, consumers can also refer to the brand reputation, user reviews and professional reviews of the tires. Tires from well-known brands are usually more guaranteed in terms of quality and performance, while user reviews and professional reviews can provide consumers with more real and objective usage experience and performance data.

In addition, it is recommended that consumers purchase tires from regular tire sales stores or authorized dealers, and install and debug them under the guidance of professionals to ensure the safety of tire use and performance.